MOBILE HOME ROOF COATING™ Elastomeric Ceramic Roof Coating

Ceramic Insulating and Soundproofing Excellence

Enriched with a special combination of ceramic microspheres and pigments. This mixture of ceramics allows for the absorbed heat to dissipate into the coating, not allowing it to travel into the dwelling. MOBILE HOME ROOF COATING™ acts as a ceramic shield of protection, withstanding extreme temperatures and thermal shock.

Advanced Mold, Mildew, and Fungi Resistance

Our specialized roof coatings provide advanced protection against mold and mildew growth. It contains high concentrations of mildewcides and other additives that inhibit the growth of microorganisms. By preventing the growth of harmful organisms, our coatings contribute to the overall longevity and durability of your roof.

Tailored Solutions for Mobile Home Roof Contractors

Understanding the unique challenges of working on mobile home roofs, we offer specialized mobile home roof coatings designed for the durability and protection required. Whether you are a seasoned mobile home roofing contractor, just getting started in the industry, or an owner, we have the products and expertise you need to succeed.

Low VOC and Environmentally Friendly

Our water-based coatings are low in V.O.C. and environmentally friendly. Say goodbye to harsh chemicals during application and equipment breakdown at the end of the day. Cleaning up is a breeze – just wash with soap and water, and your equipment will be ready for your next project!

You can review our main website page for MOBILE HOME ROOF COATING™ here.

All computer screens and/or devices will show variations of the colors on this page. Nationwide Protective Coating Manufacturers, Inc. will not be and cannot be held liable for any color matches. All colored product is non-returnable and considered a final sale

SURFACE PREPARATION:
Apply only to a sound, completely dry, well prepared roof surface. Leaks must be repaired before any coating is applied. An optional primer coat of ROOF-PRIME™, PERMABOND™ or METAL-PRIME RED-OX™ Rusted Metal Primer Sealer is recommended, but not required. If a primer was applied, it is essential that the primer surface is clean and dry and free of all moisture. If no primer was applied, prepare surface by thoroughly pressure washing with a water and chlorine mixture using at least 1500 P.S.I. to remove any previous coatings, dirt, grease, and other foreign materials, especially mold, mildew and algae. MOBILE HOME ROOF COATING™ will resist mildew growth but will not kill mildew already on the surface. Patch any holes, cracks, flashings, valleys, vents, etc., with PERMAPATCH™ Elastomeric Patching Compound, a Waterproof Caulk and Sealant. Tape & seal all seams with PERMATAPE™, a Polyester Fabric Tape. or PERMASTIK™ Butyl Tape.
Metal: Clean surface of all grease, oil and foreign matter before priming. Rusted metal and uncoated metal must be primed with METAL-PRIME RED-OX™, a Red Iron Oxide Primer Sealer. Use a degreaser on galvanized or coated metals which have oils or surface treatments. Check MOBILE HOME ROOF COATING™ adhesion on galvanized or coated metal by applying to a small area and evaluating after 48 hours. If lack of adhesion is present after evaluating, metal must be lightly scuffed without penetrating the coated finish or galvanizing. If applicable, use METAL-PRIME RED-OX™ to prime the penetrated areas.

APPLICATION PROCEDURE:
Stir well before using. Do not thin, use product as is. Mix multiple containers of color together for greater color consistency. Do not apply when temperatures are below 45 degrees Fahrenheit or when humidity is very high. Do not apply when coating will be subjected to rain or heavy dew before it has had enough time to dry (approx. 2 to 4 hours). Drying time will vary depending on temperature, humidity and location. Apply using brush, roller or spray. Spread coating uniformly. Spread Rate will vary depending on surface. Apply each coat between 12 to 16 mils wet film thickness. Wait at least 12 hours before applying a second coat. Two coats resulting in a minimum 16 mil total dry film thickness is required and is mandatory for warranty compliance, or if the optional primer was used a minimum 20 mil total dry film thickness is required and is mandatory for warranty compliance. Airless Sprayers: Use at least a 1 gallon per minute piston type airless sprayer with a minimum tip size of .021. Remove all line filters and gun filters before spraying.

Clean Up:
Clean up all spills, tools and overspray immediately while the coating is still wet with warm soapy water.

Need help? Call toll free 1-800-423-7264 to speak with a waterproofing expert.