SHINGLE SEALER™ Waterproofing Rejuvenating Roof Sealer

Need help? Volume Discounts? Buy Factory Direct!

Call toll free 1-800-423-7264 to speak with a waterproofing expert.

Visit our Website: https://www.nationwidecoatings.com/

Beautiful Clear Gloss Finish

Our Clear Glaze Waterproofing Rejuvenating Roof Sealer is expertly crafted to permeate porous surfaces, preserving, protecting, and enhancing their beauty. This sealer is both water-resistant and capable of forming a flexible, durable, and long-lasting breathable topical barrier across your roof. 

Extends, Preserves, and Rejuvenates Roof Shingles

SHINGLE SEALER™, fortified with advanced ingredients like polymers and acrylics, penetrates your roofing shingles, while simultaneously leaving behind a breathable film that enhances their durability. SHINGLE SEALER™ is your solution, as it re-glues and secures loose shingle granules, waterproofing and safeguarding your shingle roof from the elements.

Keeps Your Roof Cleaner for Longer 

Dirt, debris, and algae accumulation on your roof can lead to unsightly stains and discoloration. With SHINGLE SEALER™, a protective barrier is created on your roof's surface, effectively preventing dirt and debris from adhering and sheeting water off the roof surface.

100% Acrylic Clear Waterproofing Sealer

100% pure acrylic formulation ensures a crystal-clear finish that not only enhances the natural beauty of shingles but also provides a waterproofing barrier for long-lasting durability. Its transparent nature allows the original colors of shingles to shine through while offering protection against moisture, UV rays, and environmental factors for years to come.

Superior Mold, Mildew, and Fungi Resistance 

This formula is specifically designed to combat the growth and spread of these microorganisms, using antimicrobial agents and natural resistance in the production process.

Environmentally Friendly, Easy Application, and Water Cleanup 

Our water-based acrylic product is not only easy to apply but also hassle-free to clean up. No need for harsh chemicals; a simple wash with soap and water ensures your equipment is ready for your next project.

Check out Clear Roof Sealant for other Substrates such as metal or copper. Also review our main website listing for SHINGLE SEALER™ right here  

SHINGLE SEALER™ 

SURFACE PREPARATION:
For proper adhesion and penetration, it is essential that the surface be properly prepared. On shingles or other granulated roofing surfaces wash all 
surfaces with a low-pressure water and chlorine solution to remove any previous coatings, dirt, grease, and other foreign materials, especially mold, 
mildew and algae. Scrub, if necessary. SHINGLE SEALER™ will resist mildew growth but will not kill mildew already on the surface! Apply only to a 
sound, well prepared roof surface. Roof surface must be completely dry and free of all moisture. Patch any holes, cracks, seams, etc., with a Clear 
Acrylic paintable caulk before applying the sealer. 

APPLICATION PROCEDURE:
Stir well before using. Do not apply when temperatures are below 45 degrees Fahrenheit, or when humidity is very high. Do not apply to extremely 
hot surfaces. The surface must be dry and free of all moisture. Do not apply when sealer will be subjected to rain or heavy dew before it has had 
enough time to dry (approximately 1 to 2 hours). Drying time will vary from location to location depending on weather conditions.
Stir product occasionally during use. Apply using brush, roller or spray. Do not apply too heavily so that puddling occurs. When spraying, back roll 
with a thin nap roller cover. When rolling, use a thin nap roller cover. Sets to touch in approximately 1 hour and dries in approximately 1 to 2 hours. 
Wait at least 2 hours before recoating. Two coats of SHINGLE SEALER™ are recommended and required for warranty compliance. Coating will 
appear to be blue but will clear out as it dries. Do not thin this product; apply as it is from the container.
Sprayers:
Pump up stain sprayers can be used. Airless Sprayers may be too powerful, adjust pressure and other settings to spray a uniform amount of product 
without making runs, back roll with a thin nap roller cover.

CLEAN UP:
Clean up all spills, tools and overspray immediately while the coating is still wet with warm soapy water.